| 
| 
Świna tunnel progress Sporadic weekly.
On Uznam side, work continued on building of support buildings. Work continued for Tunnel Boring Machine Starter Chamber by excavation of the area.
On the other hand, on the Wolin island side, area cleared of trees and the infrastructure on the way, electric cables etc.
It is said that despite Covid-19 Chinese company CREG is on schedule for manufacture of the TBM. Manufacture is complete to large extend. In June factory acceptance tests will be performed in China.
TBM's main bearing with drive, has already been lowered into the starting chamber. From here, in March, the drilling of 1,484 meters of the tunnel will begin by GULERMAK.
https://www.swinoujskie.info/2020/12/14/swinoujscie-buduje-tunel-serce-maszyny-jest-juz-w-komorze/
Świna tunnel progress 20-27 December 2020
Progress on many fronts. Not only on #CREG TBM assembly.
Assembly of #CREG TBM is 60% complete
The assembly of the CREG TBM in Świnoujście is finished. Boring is expected to start end of February swinoujskie . info write.
The bored tunnel at its deepest point will be over 10 meters below the bottom of the strait. Świna is 13.5 meters deep there. 1,484 meters of TBM bored tunnel and total length will be 1,780 meters.
Świna tunnel (Tunel Świnoujście). Boring of the tunnel in Świnoujście will begin on Friday.
On Friday, March 5, 2021, a ceremony of naming the machine - "Wyspiarka" will take place, and soon after that, the drilling of the tunnel that will connect the islands of Uznam and Wolin will start.
https://conadrogach.pl/informacje/w-piatek-rozpocznie-sie-drazenie-tunelu-w-swinoujsciu.html
cover tunnel photo by: Matt Brown from London, England / CC BY
.jpg){kind=link}
Copyright 2019-2024 TunnelContact.com
Świna tunnel progress 30-November - 06-December 2020
Tunel Świnoujście - 30.11.2020 - 06.12.2020
www.youtube.com#TunelPodŚwiną #sweco #lafrentz #budujemy #tunelUsprawnienie połączenia komunikacyjnego pomiędzy wyspami Uznam i Wolin w Świnoujściu – budowa tunelu pod Świną.