Performance Prediction of TBM Disc Cutting on Marble Rock under Different Load Cases
Qing Tan 1, Liang Yi 1, Yi-Min Xia 1
1 Dept. of Mechanical and Electrical Engineering, Central South University, 410083, Changsha, China
Received 3 June...
An ANN to Predict Ground Condition ahead of Tunnel Face using TBM Operational Data
Jee-Hee Jung 1, Heeyoung Chung 1, Young-Sam Kwon 1, In-Mo Lee 1
1 School of Civil, Environmental and Architectural Engineering, Korea University, 02841, Seoul,...
Energy-driven TBM health status estimation with a hybrid deep learning approach
Yongsheng Li a, Limao Zhang a b, Yue Pan c, Serkan Tapkn d, Xieqing Song a
a School of Civil and Hydraulic Engineering, Huazhong University of Science and...
Numerical Simulation Analysis of Different Excavation Parameters for TBM 3D Disc Cutters Based on the Discrete Element Method
by Feng Liang 1, Chenyuan Pei 2, Weibang Luo 1, Minglong You 3, and Fei Tan 3
1 Xinjiang Water Conservancy and...
Use of predictive model for identification of overall wear state of TBM cutterhead based on tunneling parameters
Gang Wang a b, Jenisha Singh c, Jingren Tan c, Guyang Li d
a School of Advanced Interdisciplinary Studies, Hunan...
TBM Cutterhead Load Prediction Model Based on the Two-Stage Attention Mechanism
Mengqi Zhu, Dansheng Yao, Hehua Zhu, Bingyi Pan, Yudan Gou, Nan Jiang
Published at Information Technology in...
Investigation into the collapse height of TBM jamming machinery induced by fault fracture zones and the verification of applicability
Qian Zhang a c d, Yan Ma b c, Yanliang Du a c, Lijie Du a c, Minyuan Wang a c, Sunhao Zhang d, Yaoqi Nie a...
Wear and abnormal fracture failure mechanisms of alloy teeth in TBM insert tooth disc cutters
Xiaotian Li a b, Mengqi Zhang a b, Jiliang Mo a b
a Institute of Tribology Research, School of Mechanical Engineering, Southwest Jiaotong University,...
Feasibility study of an adjustable-power laser cutting head for TBM applications: Focus on rock fragmentation efficiency and energy consumption
Kui Zhang a b, Shangjun Xiao b, Wangwang Liu b, Dinghua Wang c, Gaofeng Zhang d
a Engineering...
The Hampton Roads Bridge-Tunnel (HRBT) Expansion project has rotated the largest ever tunnel boring machine (TBM) on nitrogen skates.
https://www.geplus.co.uk/news/hrbt-expansion-project-breaks-record-with-nitrogen-table-tbm-rotation-03-12-2024/
Open article, No money.
Influence of speed and line spacing on aerodynamic forces in high speed train passing in tunnels
Xiuping Duan a, Yuangui Mei b, Xiao Hu b, Changbao Qi c
a Urban Rail Research Institute, Shandong Polytechnic,...
Predicting Cutter Wear in Shield Tunneling Construction Using Machine Learning: A Case Study from Chunfeng Road Tunnel Project in China
Xiaobin Ding, Linxuan Yuan, Weiran Huang
information technology in geo-engineering
Publisher is Springer...
Experimental study on partial wear of TBM disc cutter
Xinghai Zhou
State Key Laboratory of Fluid Power & Mechatronic Systems, Zhejiang University, Hangzhou, China
Yakun Ghang
State Key Laboratory of Fluid Power & Mechatronic...
Study on gas explosion propagation law in excavation roadway with TBM
Ao Liu
College of Safety Science and Engineering, Liaoning Technical University, No. 188, Longwan South Street, Huludao, 125105, Liaoning, China
Key Laboratory of Mine...
Influence of tunnel excavation on the magnitude and rotation angle of principal stress in surrounding rock
Chenwei Yuan
School of Civil Engineering, Suzhou University of Science and Technology, Suzhou, 215009, China
Jingjing Lu
State Key...
Measurement And Analysis Of Surface Settlement Caused By Construction Of Quasi-rectangular Shield Tunnel In Rich Water-sand Stratum
Yong-gang
Ding School Of Civil Engineering, Henan University Of Technology, Zhengzhou, 450001, Henan, China
Cheng...
Numerical analyses of the influences of rock properties and joints on rock fragmentation in shaft sinking by drilling method
Pingping Xu
Engineering Research Center of Underground Mine Construction, Ministry of Education, Anhui University of...